Polypropylene bag filter for all liquids - excellent quality filter,...
Desulfurization of 12v-battery permanently connected to your car or...
Heat Exchanger 30 Plates LDR / HVB stainless steel plates 2 parallel inputs + 2 parallel outputs (2x10mm + 2x16mm) (each circuit has its input and output – Soldered and sealed tip: 2x 16mm (Liquid) 2x 10mm (diesel or oil)
This product is no longer in stock
Warning: Last items in stock!
Liquid heat exchanger (cooling) / Liquid (diesel or oil) for stainless steel plates (excellent resistance to corrosion) brazed copper (very good seal)
Fuels with high viscosity index:
This heat exchanger has a very good performance, it can transfer the heat from the cooling liquid to the viscous fuel, by reaching a temperature close to 70 ° C, and it behaves like diesel.
During the winter periods, at negative temperatures (-5 ° C to -30 ° C), your fuel becomes very liquid with this heater plate, you will consume less fuel, the performance of the engine approaches to the more clement temperature periods.
|Pression de service||3 MPa=30bars|
|Press max circuit refroidisst||1,3 bars|
|Press max circuit carburant||1,5 à 1,7 bars|
|Plage de température||-196 à +200°C|
|Surface d'échange thermique||0,392 M2|
|Dimensions||larg 70mm Lg 185mm Haut 75mm|
|Tétines (haut de 25mm)||Carb 10mm - LDR 16mm|
2 parallel inputs + 2 parallel outputs (2x10mm + 2x16mm) (each circuit has its input and output at the same side of the heat exchanger, viewed in the direction of the length)
service pressure: 3 MPs=30bars (for a maximum pressure in the cooling circuit from 1.3 bar, and 1.5 to 1.7 in the fuel system if booster pump, )
soldered and sealed tips : 2x 16mm (Liquid) 2x 10mm (diesel oil)
• Bi-carburization installation (authorized in Belgium or Germany) or Diester, greatly improves the fluidity of the viscous fuel without consuming electricity.
• Cooling the fuel in the marine environment to prevent the development of certain bacteria.
• Poly combustible stove
• Heating floor, heat pump.
Heat transfer through the liquid stainless steel plates / Liquid: The two fluids circulate in opposite direction in the heat exchanger and the heat of the one can heat the other one. Heat transfer is optimal thanks to this improved stainless steel alloy.
- Heat exchanger 30 plates
- screws, mounting bolts into the bodywork